Gel Aplicare Folie ADBL PPF Gel, 500ml

ADBL PPF Gel Film Application Gel, 500ml is a water-based gel for applying PPF film, designed to facilitate installation on mirrors, curved elements, or screens. Its formula contains special slip agents that reduce the risk of adhesive lifting and allow precise, long-lasting positioning. The product can be diluted up to a 1:3 ratio, depending on need, and rinses off very easily.

This multifunctional gel for PPF film installation is 99% water-based and ensures controlled and safe application, even on complex surfaces. Ideal for stretching the film over difficult elements such as mirrors or extruded components.

Reduces the risk of adhesive lifting and allows fine adjustments where exact positioning is required. It is safe for glossy black surfaces and for screens, facilitating a quick and clean installation.

The product rinses off easily and can also be used as protection against impurities that drain out from under seals. After application, drying the work area with a clean microfiber cloth is recommended.

Instructions for use:

Clean and degrease the surface thoroughly using ADBL Surface Cleaner Car Cleaning and Degreasing Solution, 1000ml
Remove dust and dirt
Apply ADBL PPF Gel to the surface to be covered and to the adhesive side of the film
Position the film precisely
Smooth the surface with a squeegee and secure the edges
Wipe off gel residue with a clean microfiber

Quantity: 500ml